FTLDRM168A Dialyzer Reprocessor

Size: 470 × 380 × 480 mm (L × W × H)
Weight: 30 kg
Power Supply: AC 220V ±10%, 50–60Hz, 2A
Input Power: 150W
Water Input Pressure: 0.15–0.35 MPa (21.75–50.75 PSI)
Water Input Temperature: 10–40°C
Minimum Water Inlet Flow: 1.5 L/min
Reprocessing Time: About 12 minutes per cycle
Working Environment Temperature: 5–40°C
Working Environment Relative Humidity: ≤80%
Storage Temperature: 5–40°C
Storage Relative Humidity: ≤80%

[oneclick single="true" phone="+8801335129750" product="current" text="Inquire On WhatsApp" message="Hello, I need to know more about this Product." fullwidth="false"]

Compare

Category: Hemodialysis

Descriptions

FTLDRM168A Dialyzer Reprocessor – Automated Hemodialyzer Reprocessing Machine

The FTLDRM168A Dialyzer Reprocessor is a medical equipment system designed for reprocessing compatible reusable hemodialyzers in appropriately equipped dialysis centers, hospitals, and renal care facilities.

Featuring a compact equipment design, a digital control interface, and a catalog-listed reprocessing cycle of approximately 12 minutes, the FTLDRM168A provides a dedicated platform for facilities operating validated dialyzer reprocessing programs.

With dimensions of 470 × 380 × 480 mm and a weight of 30 kg, the machine is designed for installation in suitable medical equipment and dialysis reprocessing areas.

The system operates on AC 220V power and requires a specified water supply pressure and flow rate.

Key Features & Benefits

1. Dedicated Dialyzer Reprocessing System

Designed for processing compatible reusable hemodialyzers according to manufacturer-approved reprocessing procedures.

2. Approximately 12-Minute Processing Cycle

The catalog specifies a reprocessing time of approximately 12 minutes per cycle. Actual cycle duration may depend on the validated operating procedure.

3. Compact Equipment Design

Features dimensions of 470 × 380 × 480 mm, making it suitable for consideration in dedicated dialysis reprocessing workspaces.

4. Digital Control Interface

The product image shows an integrated digital display and control panel for interacting with the equipment.

5. Defined Water Pressure Requirements

Operates with a catalog-listed water input pressure of 0.15–0.35 MPa.

6. Minimum Water Inlet Flow

Requires a minimum water inlet flow of 1.5 L/min under the specified operating conditions.

7. Water Temperature Compatibility

Supports a catalog-listed inlet water temperature range of 10–40°C.

8. 150W Rated Input Power

Features an input power specification of 150W with an AC 220V electrical supply.

9. Defined Operating Environment

The equipment is specified for operation at ambient temperatures of 5–40°C and relative humidity not exceeding 80%.

10. Dedicated Clinical Equipment Application

Intended for use in healthcare facilities with approved dialyzer reuse policies, validated reprocessing procedures, and appropriate infection prevention controls.

Applications

The FTLDRM168A may be suitable for manufacturer-approved use in:

Hospital hemodialysis departments
Dialysis centers with validated dialyzer reuse programs
Renal care facilities
Dedicated dialyzer reprocessing areas
Hemodialysis equipment reprocessing facilities

Dialyzer reprocessing must follow applicable regulations, manufacturer instructions, validated cleaning and disinfection procedures, and patient-specific traceability requirements.

Why Choose the FTLDRM168A Dialyzer Reprocessor?

The FTLDRM168A combines a compact design, defined water supply requirements, digital controls, and an approximately 12-minute reprocessing cycle in a dedicated dialyzer reprocessing system.

Its technical configuration provides a basis for healthcare facilities evaluating equipment for approved reusable dialyzer programs.

Before procurement or clinical implementation, facilities should verify dialyzer compatibility, cleaning and disinfection performance, residual disinfectant testing, leak and integrity testing, automated safety controls, and applicable regulatory authorization.